Cobra® - Revolutionary high pressure diaphragm pumps

Cobra® is an exclusive high pressure double diaphragm pump suitable for Airless and AirCoat applications up to 250 bar. Cobra® is the first high pressure pneumatic pump without packing.

The lack of contact between the material and the external atmosphere (the pump is completely sealed), the absence of friction in the fluid section and the minimum shear make it perfect for any kind of material
including the most critical ones such as reactive paints (UV paints, isocyanates, acrylics) or highly abrasive materials.

The pump works with extremely low pulsation and creates a uniform paint flow, achieving a perfect spray pattern and superb surface quality.

With its minimized internal volumes, the pump is designed to greatly reduce solvent consumption and material waste during flushing and color-change operations.

Special features

Perfect with Airless and AirCoat applications.
Possibility to apply materials sensitive to shearing and moisture.
Extremely low shear forces and frictions inside the pump.
Greatest flexibility for small quantities of paint and operations with small batches.
Substantial reduction in paint waste and solvent consumption.
Reduced maintenance.
Prove WAGNER IceBreaker air motor.

Cobra 40-10

zoom

Cobra® 40-10 is the ideal solution for working with small quantities and frequent color changes - recommended for single-gun up to three-gun applications in the wood and furniture industry, small carpentry shops and joineries, and the general metal industry.

Cobra® 40-10 is also ideal for feeding base or hardener for 2K mixing units (FlexControl and FlexControl Plus)..

The reduced internal volumes (only 10 cc per double stroke) ensures drastic reduction in solvent consumption during flushing operations and make Cobra 40-10 ideally solution for working with small quantities and frequent color changes.

Technical data

Pressure ratio	40:1
Max. fluid pressure	250 bar / 25 MPa / 3626 PSI
Air inlet pressure	6 bar / 0.6 MPa / 87 psi
Volumetric flow rate per double stroke	10 cc
Max. flow rate	2,0 l/min
Weight	19 Kg
Fluid outlet	3/8" NPS

Cobra 40-25

zoom

Cobra® 40-25 is suitable for high flow rates applications (up to 5 l/min) such as multi-gun operations or for very large nozzles.
It is also an excellent solution for feeding automatic spraying systems in wood coating lines or for heavy-duty applications in carpentry, the metal industry, and leather coating.

Cobra® 40-25 is ideal for feeding base or hardener for 2K mixing units when high delivery is needed.

Technical data

Pressure ratio	40:1
Max. fluid pressure	250 bar / 25 MPa / 3626 PSI
Air inlet pressure	6 bar / 0.6 MPa / 87 psi
Volumetric flow rate per double stroke	25 cc
Max. flow rate	5,0 l/min
Weight	32 Kg
Fluid outlet	3/8" NPS

Product information

Calculate your savings

PayBack form

		Atex classification
		II 2 G IIB X

		Processable materials
		Water-borne and solvent-borne paints Friction-sensitive materials Moisture-sensitive materials Shear-sensitive water-borne coatings UV-cure materials Acrylics, glues, abrasives

		Application areas
		Wood Woodworking industry Furniture industry Kitchen industry

		Applications
		Airless AirCoat Automatic applications Manual applications Electrostatic applications Feeding of 1 o more guns simultaneously