Airless heated hoses

The TempSpray improves the properties of the paint application in the workshop and on the building site.

The required temperature can be set smoothly from 20° - 60° C as required by pressing the arrow button on the control unit.
A compact unit thanks to integral heating element.

Heating instead of diluiting

All heating systems are warmed up by an electric heating element, which is located inside the hose, directly in the paint flow. The paint material is heated to the required temperature uniformly along the whole length of the hose (smoothly regulated from 20° to 60° C).

This leads to a drop in the viscosity and thus an improvement in the application of paint material. Due to be heated up in the heating hose the coating materials are always at the ideal working temperature - regardless of seasonal temperature fluctuations!

The TempSpray products can be adapted to all Airless and AirCoat units and thus offer a wild field of use.

Advantages that convince

The guarantee for the perfect finish. Achieve an optimal surface quality. Thanks to warming up the coating material a very soft spray jet is generated. This increases the atomisation quality.

The answer to the VOC guidelines. The coating material can be set to the spraying viscosity without being diluted. This is of particular benefit especially for higher viscosity materials.

The solution to reduce overspray. Heating the material means a reduction in spraying pressure. Heating brings about a reduction in material viscosity, allowing a lower spraying pressure to be set.

zoom

TEMPSPRAY H 126

Ideal for any painting and undercoating jobs. Easily adapted to all Airless and AirCoat units. Compact and low weight unit..

Code: 2311659

Scope of delivery

H 126 basic unit incl. stainless steel hose 1/4 NPS / DN6 / 10 m.

Heating power	600 W
Voltage	230 V / 50 Hz
Max. pressure	250 bar
Temperature regulator	20°C - 60°C
SSt hose	1/4 NPS / DN6 / 10 m
Main connection lead	4 m
Weight	3,5 Kg

zoom

TEMPSPRAY H 226

Ideal for all high viscosity materials. Easy to handle thanks to the hose reel which is ideal for building sites.

Code: 2311660

Scope of delivery

H 226 basic unit
hose reel
heated hose DN10, 15 m,
hose 1/4" DN4, 1 m.

Heating power	1300 W
Voltage	230 V / 50 Hz
Max. pressure	250 bar
Temperature regulator	20°C - 60°C
Hose	DN10 / 15 m - PU sheating
Main connection lead	4 m
Weight	18,0 Kg

zoom

TEMPSPRAY H 326

Ideal for all high viscosity materials. Easy to handle thanks to the hose reel which is ideal for building sites. Increased operating range (60 m).

Code: 2311661

Scope of delivery

H 326 basic unit
hose reel
heated hose DN10, 30 m,
hose 1/4" DN4, 1 m.

Heating power	1100 W
Voltage	230 V / 50 Hz
Max. pressure	250 bar
Temperature regulator	20°C - 60°C
Hose	DN10 / 30 m - PU sheating
Main connection lead	4 m
Weight	23,0 Kg

zoom

TEMPSPRAY H 426

Specifically for the application of spray body fillers. Adaptable to all high-perfomance Airless units of WAGNER.

Code: 2311662

Scope of delivery

H 426 basic unit
heated hose 3/4 NPS / DN19 / 15 m.

Heating power	1300 W
Voltage	230 V / 50 Hz
Max. pressure	250 bar
Temperature regulator	20°C - 60°C
Hose	DN10 / 30 m - PU sheating
Main connection lead	4 m
Weight	16,5 Kg

Basic units

Tempspray H 126	2311659
Tempspray H 226	2311660
Tempspray H 326	2311661

Tempspray H 426

2311662

Product information

		Classificazione ATEX
		Da utilizzare SOLO con prodotti a base acqua

		Prodotti applicabili
		Vernici a base acqua Smalti Vernici intumescenti Vernici tixotropiche Fondi Finiture Idropitture murali

		Aree di applicazione
		Legno Metallo Plastica Edilizia

		Applicazioni
		Bassa pressione Alta pressione Automatiche Manuali Airless AirCoat HVLP